RIGOL DP832A - Manual (Page 93)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-69
:PRESet:KEY
Syntax :PRESet:KEY {DEFAULT|USER1|USER2|USER3|USER4}
:PRESet:KEY?
Description Define the setting recalled by Preset at the front panel.
Query the setting recalled by Preset at the front panel.
Parameter Name Type Range Default
{DEFAULT|USER1|USER2|
USER3|USER4}
Discrete
DEFAULT|USER1|USER2|
USER3|USER4
DEFAULT
Explanation  DP800 supports to restore the instrument to the default setting (DEFAULT) or
recall the user-defined setting (USER1, USER2, USER3 and USER4).
 After sending this command to define the setting recalled by Preset at the
front panel, sending the :PRESet[:APPLy] command or pressing Preset at the
front panel can restore the instrument to the default setting or recall the
specified user-defined setting.
 When user-defined setting is selected, you can use the :PRESet:USER:SET
series commands to set the parameters of the user-defined setting currently
selected.
Return Format The query returns DEFAULT, USER1, USER2, USER3 or USER4.
Example :PRES:KEY USER1 /*Define the setting recalled by Preset at the front panel to
the first group of user-defined setting*/
:PRES:KEY? /*Query the setting recalled by Preset at the front panel and
the query returns USER1*/
Related
Command
:PRESet[:APPLy]