RIGOL DP832A - Manual (Page 77)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-53
 :OUTPut:OVP:ALAR?
 :OUTPut:OVP:QUES?
 :OUTPut:OVP:CLEAR
 :OUTPut:OVP[:STATe]
 :OUTPut:OVP:VALue
 :OUTPut:RANGe
 :OUTPut:SENSe
 :OUTPut[:STATe]
 :OUTPut:TIMEr
 :OUTPut:TIMEr:STATe
 :OUTPut:TRACk
:OUTPut:CVCC?
:OUTPut:MODE?
Syntax :OUTPut:CVCC? [CH1|CH2|CH3]
:OUTPut:MODE? [CH1|CH2|CH3]
Description Query the current output mode of the specified channel.
Parameter Name Type Range Default
[CH1|CH2|CH3] Discrete CH1|CH2|CH3 None
Explanation  DP800 series power supply provides three output modes, including CV
(Constant Voltage), CC (Constant Current) and UR (Unregulated). In CV mode,
the output voltage equals the voltage setting value and the output current is
determined by the load; in CC mode, the output current equals the current
setting value and the output voltage is determined by the load; UR is the
critical mode between CV and CC modes.
 When [CH1|CH2|CH3] is omitted, the system queries the output mode of the
current channel.
Return Format The query returns CV, CC or UR.
Example :OUTP:CVCC? CH1
:OUTP:MODE? CH1 /*Query the output mode of CH1 and the query returns CV*/