RIGOL DP832A - Manual (Page 78)

RIGOL Chapter 2 Command System
2-54 DP800 Programming Guide
:OUTPut:OCP:ALAR?
:OUTPut:OCP:QUES?
Syntax :OUTPut:OCP:ALAR? [CH1|CH2|CH3]
:OUTPut:OCP:QUES? [CH1|CH2|CH3]
Description Query whether OCP occurred on the specified channel.
Parameter Name Type Range Default
[CH1|CH2|CH3] Discrete CH1|CH2|CH3 None
Explanation  Overcurrent protection (OCP) refers to that the output turns off automatically
when the actual output current of the channel exceeds the overcurrent
protection value.
 When [CH1|CH2|CH3] is omitted, the system queries whether OCP occurred
on the current channel.
 You can send the :OUTPut:OCP:CLEAR command to clear the OCP occurred on
the specified channel.
Return Format The query returns YES or NO.
Example :OUTP:OCP:ALAR? CH1
:OUTP:OCP:QUES? CH1 /*Query whether OCP occurred on CH1 and the query
returns YES*/
Related
Command
:OUTPut:OCP:CLEAR