RIGOL DP832A - Manual (Page 137)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-113
:SYSTem:COMMunicate:LAN:GATEway
Syntax :SYSTem:COMMunicate:LAN:GATEway
:SYSTem:COMMunicate:LAN:GATEway?
Description Set the default gateway.
Query the current default gateway.
Parameter Name Type Range Default
ASCII string Refer to the "Explanation" None
Explanation  This command is only available when the manual IP configuration mode is
enabled ( :SYSTem:COMMunicate:LAN:MANualip[:STATe] ).
 The format of is nnn.nnn.nnn.nnn; the first nnn ranges from 1 to
223 (except 127), the other three range from 0 to 255.
 You are recommended to ask your network administrator for a gateway
address available.
 The new setting will only take into effect when
the :SYSTem:COMMunicate:LAN:APPLy command is executed to apply the
network parameter currently set after this command is send.
Return Format The query returns the default gateway, for example, 172.16.3.1.
Example :SYST:COMM:LAN:GATE 172.16.3.1 /*Set the default gateway*/
:SYST:COMM:LAN:GATE? /*Query the current default gateway and the
query returns 172.16.3.1*/
Related
Commands
:SYSTem:COMMunicate:LAN:MANualip[:STATe]
:SYSTem:COMMunicate:LAN:APPLy