Initiate command, Initiate, Initiate command -30 – RIGOL DP832A User Manual
Page 54: Initiate -30
RIGOL
2-30
DP800 Programming Guide
:INITiate Command
The :INITiate command is used to initialize the trigger system of the instrument.
:INITiate
Syntax
:INITiate[:IMMediate]
Description
Initialize the trigger system.
Explanation
When the trigger type (
) is set to "IMM" (immediate trigger), the instrument
will execute a complete trigger operation after executing this command.
When the trigger type (
) is set to "BUS" (Bus trigger, namely software trigger),
executing this command will initialize the trigger system. Then, send the
command to trigger the power supply and the power supply will starts the
trigger operation after the specified delay time (when the delay time is set
)).
trigger system.
Related
Commands
:TRIGger:IN:CHTYpe
*TRG
:TRIGger[:SEQuence]:DELay