RIGOL DP832A - Manual (Page 100)

RIGOL Chapter 2 Command System
2-76 DP800 Programming Guide
:PRESet:USER[]:SET:VOLTage
Syntax :PRESet:USER[]:SET:VOLTage {|MINimum|MAXimum}
:PRESet:USER[]:SET:VOLTage? [MINimum|MAXimum]
Description Set the voltage of the current channel of the specified user-defined setting.
Query the voltage of the current channel of the specified user-defined setting.
Parameter Name Type Range Default
[] Discrete 1|2|3|4 None
Real
Voltage range of the
current channel
Refer to Table 2-3
Explanation  When [] is 1, 2, 3 or 4, the system sets the related parameters of the first,
second, third or fourth group of user-defined setting respectively. When []
is omitted, the system sets the parameters of the user-defined setting currently
selected by default.
 For the voltage range of the current channel, please refer to Table 2-1.
 By default, this command sets the parameters of the channel currently selected.
For multi-channel models, if you want to set the parameters of other channels,
please use the :INSTrument:NSELect , :INSTrument[:SELEct]
or :INSTrument[:SELect] command to set the desired channel as the current
channel.
 You can send the :PRESet:USER[]:SET:DEFault command to restore the
parameters of the specified user-defined setting to the default values.
Return Format The query returns the voltage, for example, 5.000.
Example :PRES:USER1:SET:VOLT 5 /*Set the voltage of the current channel in the first
group of user-defined setting to 5V*/
:PRES:USER1:SET:VOLT? /*Query the voltage of the current channel in the first
group of user-defined setting and the query returns
5.000*/
Related
Commands
:INSTrument:NSELect
:INSTrument[:SELEct]
:INSTrument[:SELect]
:PRESet:USER[]:SET:DEFault