RIGOL DP832A - Manual (Page 39)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-15
:DELAY:PARAmeter
Syntax :DELAY:PARAmeter ,{ON|OFF},
:DELAY:PARAmeter? [,]
Description Set the delayer parameters of the specified group.
Query the delayer parameters of the specified groups.
Parameter Name Type Range Default
Integer 0 to 2047 None
{ON|OFF} Bool ON|OFF
OFF (even group);
ON (odd group)
Integer 1s to 99999s 1s
Integer 0 to 2047 None
Integer 1 to 2048 1
Explanation  is the group number of the delayer parameters to be set;
{ON|OFF} is the output state; is the delay time.
 is the group number of the first group of delayer parameters to be
queried; is the total number of groups of delayer parameters to
be queried. When is omitted, the command queries a single
group of delayer parameters by default.
Return Format The query returns a string starting with #. For example,
#90000000152,OFF,3;3,ON,1;; wherein, #9000000015 is the data block
header; 2,OFF,3;3,ON,1; are the actual delayer parameters.
 The data block header is used to describe the data stream length information
and starts with #. For example, the number "9" in #9000000015 denotes
that the 9-bit data (000000015) following it is used to denote the data stream
length (15 bytes).
 The format of each group of delayer parameters is "number,output state,delay
time"; multiple groups of parameters are separated by";". For example,
2,OFF,3;3,ON,1; denotes there are two groups of delayer parameters; the
number of the first group of delayer parameters is 2, the output state is OFF
and the delay time is 3s; the number of the second group of delayer
parameters is 3, the output state is ON and the delay time is 1s.
Example :DELAY:PARA 1,ON,2 /*Set the delayer parameters of the first group. Set the
state of the first group to ON and the delay time to 2s*/
:DELAY:PARA? 3,2 /*Query two groups of delayer parameters starting from
the third group. The query returns
#90000000153,ON,1;4,OFF,1;*/