RIGOL DP832A - Manual (Page 89)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-65
:OUTPut:TIMEr:STATe
Syntax :OUTPut:TIMEr:STATe {P8V|P30V|N30V},{ON|OFF}
:OUTPut:TIMEr:STATe? {P8V|P30V|N30V}
Description Turn on or off the timer output function of the specified channel.
Query the state of the timer output function of the specified channel.
Parameter Name Type Range Default
{P8V|P30V|N30V} Discrete P8V|P30V|N30V None
{ON|OFF} Bool ON|OFF OFF
Explanation  Turning on the timer will change the output state of the channel; therefore,
make sure that the output state change will not affect the devices connected to
the power supply before turning on the timer.
 The timer output is valid when both the timer and the channel output are turned
on.
 You cannot modify the timer parameters when the timer is turned on.
 For multi-channel models, you can send
the :INSTrument[:SELEct] , :INSTrument[:SELect] or :INSTrument:NSELect
command to switch the current channel as well as set the timer parameters of
the channel selected and turn on or off the timer.
 The timer and delayer ( :DELAY[:STATe] ) canot be turned on at the same time.
 You can also send the :TIMEr[:STATe] command to turn on or off the timer
output function.
Return Format The query returns ON or OFF.
Example :OUTP:TIME:STAT P8V,ON /*Turn on the timer output function of CH1*/
:OUTP:TIME:STAT? P8V /*Query the state of the timer output function of CH1
and the query returns ON*/
Related
Commands
:INSTrument[:SELEct]
:INSTrument[:SELect]
:INSTrument:NSELect
:DELAY[:STATe]
:TIMEr[:STATe]