RIGOL DP832A - Manual (Page 148)

RIGOL Chapter 2 Command System
2-124 DP800 Programming Guide
:SYSTem:RGBBrightness
Syntax :SYSTem:RGBBrightness {|MINimum|MAXimum}
:SYSTem:RGBBrightness? [{MINimum|MAXimum}]
Description Set the RGB brightness of the screen.
Query the RGB brightness of the screen.
Parameter Name Type Range Default
Integer 1 to 100 50 (factory setting)
Return Format The query returns an integer from 1 to 100, for example, 47.
Example :SYST:RGBB 47 /*Set the RGB brightness of the screen to 47%*/
:SYST:RGBB? /*Query the RGB brightness of the screen and the query returns
47*/
:SYSTem:RWLock
Syntax :SYSTem:RWLock[:STATe] [ON|OFF]
Description Turn on or off the remote lock.
Parameter Name Type Range Default
[ON|OFF] Bool ON|OFF OFF
Explanation  When the instrument is in remote lock mode, all the keys at the front panel
(except the output switch key of each channel, and the power
switch key ) are not available and is displayed in the status bar on the
user interface ( is not displayed).
 When [ON|OFF] is omitted, the system turns on the remote lock.
 You can also send the :SYSTem:KLOCk:STATe command to turn on or off the
remote lock.
Return Format The query returns ON or OFF.
Example :SYST:RWL ON /*Turn on the remote lock*/
Related
Command
:SYSTem:KLOCk:STATe