System:communicate:gpib:address, System:communicate:lan:apply, System:communicate:gpib:address -109 – RIGOL DP832A User Manual
Page 133: System:communicate:lan:apply -109
RIGOL
DP800 Programming Guide
2-109
:SYSTem:COMMunicate:GPIB:ADDRess
Syntax
:SYSTem:COMMunicate:GPIB:ADDRess
:SYSTem:COMMunicate:GPIB:ADDRess?
Description
Set the GPIB address.
Query the current GPIB address.
Parameter
Name
Type
Range
Default
Integer
0 to 30
2
Explanation
Before using the GPIB interface, extend a GPIB interface using the USB-GPIB
interface converter; then, connect the instrument and PC using GPIB cable and set
the GPIB address.
Return Format
The query returns an integer, for example, 7.
Example
:SYST:COMM:GPIB:ADDR 7 /*Set the GPIB address*/
:SYST:COMM:GPIB:ADDR? /*Query the current GPIB address and the query
returns 7*/
:SYSTem:COMMunicate:LAN:APPLy
Syntax
:SYSTem:COMMunicate:LAN:APPLy
Description
Apply the network parameters currently set.
Explanation
The new setting will only take into effect when this command is executed after the
LAN parameters are set.
Example
:SYST:COMM:LAN:APPL /*Apply the network parameters currently set*/