RIGOL DP832A - Manual (Page 150)

RIGOL Chapter 2 Command System
2-126 DP800 Programming Guide
:SYSTem:SELF:TEST:FAN?
Syntax :SYSTem:SELF:TEST:FAN?
Description Query the self-test result of the fan.
Explanation You can also send the *TST? command to query the self-test results (including the
self-test results of the TopBoard, BottomBoard and fan).
Return Format The query returns PASS or FAIL.
Related
Command
*TST?
:SYSTem:SELF:TEST:TEMP?
Syntax :SYSTem:SELF:TEST:TEMP?
Description Query the self-test result of the temperature.
Return Format The query returns the temperature value and the unit is ℃, for example, 23.67.
:SYSTem:TRACKMode
Syntax :SYSTem:TRACKMode {SYNC|INDE}
:SYSTem:TRACKMode?
Description Set the track mode.
Query the current track mode.
Parameter Name Type Range Default
{SYNC|INDE} Discrete SYNC|INDE SYNC
Explanation  The specified channels of DP831A, DP831, DP832A and DP832 support the track
function. You can select the desired track mode according to your need.
 SYNC: synchronous mode. For two channels (the channels should be of the
same instrument) that support the track function, the track function of the other
channel will be enabled or disabled at the same time when the track function of
a channel is enabled or disabled.
 INDE: independent mode. For two channels (the channels should be of the
same instrument) that support the track function, the status of the track
function of the other channel will not be affected when the track function of a
channel is enabled or disabled.
Return Format The query returns SYNC or INDE.
Example :SYST:TRACKM SYNC /*Set the track mode to synchronous*/
:SYST:TRACKM? /*Query the current track mode and the query returns
SYNC*/
Related
Command
:SYSTem:ONOFFSync