RIGOL DP832A - Manual (Page 153)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-129
:TIMEr:CYCLEs
Syntax :TIMEr:CYCLEs {N|I}[,]
:TIMEr:CYCLEs?
Description Set the number of cycles of the timer.
Query the current number of cycles of the timer.
Parameter Name Type Range Default
{N|I} Discrete N|I N
Integer 1 to 99999 1
Explanation  The number of cycles is defined as the number of times that the instrument
performs timing output according to the preset voltage/current. You can set
the number of cycles to infinite (I) or a specified value (N,).
 The total number of groups in timing output = the number of groups × the
number of cycles; wherein, the number of groups is set by the :TIMEr:GROUPs
command.
 The power supply will terminate the timer function when the total number of
groups of outputs is finished. At this point, the state of the power supply
depends on the setting of the :TIMEr:ENDState command.
Return Format The query returns I or N,, for example, N,20.
Example :TIME:CYCLE N,20 /*Set the number of cycles of the timer to 20*/
:TIME:CYCLE? /*Query the current number of cycles of the timer and the
query returns 20*/
Related
Commands
:TIMEr:ENDState
:TIMEr:GROUPs