RIGOL DP832A - Manual (Page 60)

RIGOL Chapter 2 Command System
2-36 DP800 Programming Guide
:MEASure[:VOLTage][:DC]?
Syntax :MEASure[:VOLTage][:DC]? [CH1|CH2|CH3]
Description Query the voltage measured on the output terminal of the specified channel.
Parameter Name Type Range Default
[CH1|CH2|CH3] Discrete CH1|CH2|CH3 None
Explanation  If [CH1|CH2|CH3] is omitted, the command queries the voltage measured on
the output terminal of the channel currently selected.
 You can also send the :MEASure:CURRent[:DC]? and :MEASure:POWEr[:DC]?
commands to query the current and power measured on the output terminal of
the specified channel respectively, or send the :MEASure:ALL[:DC]? command
to query the voltage, current and power measured on the output terminal of
the specified channel at the same time.
Return Format The query returns the voltage measured on the output terminal of the specified
channel, for example, 2.0000.
Example :MEAS? CH1 /*Query the voltage measured on the output terminal of CH1 and
the query returns 2.0000*/
Related
Commands
:MEASure:ALL[:DC]?
:MEASure:CURRent[:DC]?
:MEASure:POWEr[:DC]?