RIGOL DP832A - Manual (Page 94)

RIGOL Chapter 2 Command System
2-70 DP800 Programming Guide
:PRESet:USER[]:SET:CURRent
Syntax :PRESet:USER[]:SET:CURRent {|MINimum|MAXimum}
:PRESet:USER[]:SET:CURRent? [MINimum|MAXimum]
Description Set the current value of the current channel in the specified user-defined setting.
Query the current value of the current channel in the specified user-defined setting.
Parameter Name Type Range Default
[] Discrete 1|2|3|4 None
Real Current range of the current channel Refer to Table 2-3
Explanation  When [] is 1, 2, 3 or 4, the system sets the related parameters of the first,
second, third or fourth group of user-defined setting respectively. When []
is omitted, the system sets the parameters of the user-defined setting
currently selected by default.
 For the current range of the current channel, please refer to Table 2-1.
 By default, this command sets the parameter of the channel currently selected.
For multi-channel models, if you want to set the corresponding parameters of
other channels, please use the :INSTrument:NSELect , :INSTrument[:SELEct]
or :INSTrument[:SELect] command to set the desired channel as the current
channel.
 You can send the :PRESet:USER[]:SET:DEFault command to restore the
parameters of the specified user-defined setting to the default values.
Return Format The query returns the current value, for example, 1.5000.
Example :PRES:USER1:SET:CURR 1.5 /*Set the current of the current channel in the first
group of user-defined setting to 1.5A*/
:PRES:USER1:SET:CURR? /*Query the current of the current channel in the first
group of user-defined setting and the query returns
1.5000*/
Related
Commands
:INSTrument:NSELect
:INSTrument[:SELEct]
:INSTrument[:SELect]
:PRESet:USER[]:SET:DEFault