RIGOL DP832A - Manual (Page 58)

RIGOL Chapter 2 Command System
2-34 DP800 Programming Guide
:MEASure Commands
Command List:
 :MEASure:ALL[:DC]?
 :MEASure:CURRent[:DC]?
 :MEASure:POWEr[:DC]?
 :MEASure[:VOLTage][:DC]?
:MEASure:ALL[:DC]?
Syntax :MEASure:ALL[:DC]? [CH1|CH2|CH3]
Description Query the voltage, current and power measured on the output terminal of the
specified channel.
Parameter Name Type Range Default
[CH1|CH2|CH3] Discrete CH1|CH2|CH3 None
Explanation  If [CH1|CH2|CH3] is omitted, the command queries the voltage, current and
power measured on the output terminal of the channel currently selected.
 You can also send the :MEASure:CURRent[:DC]? , :MEASure:POWEr[:DC]?
and :MEASure[:VOLTage][:DC]? commands to query the current, power and
voltage measured on the output terminal of the specified channel respectively.
Return Format The query returns the voltage, current and power (separated by commas)
measured on the output terminal of the specified channel, for example,
2.0000,0.0500,0.100.
Example :MEAS:ALL? CH1 /*Query the voltage, current and power measured on the
output terminal of CH1 and the query returns
2.0000,0.0500,0.100*/
Related
Commands
:MEASure:CURRent[:DC]?
:MEASure:POWEr[:DC]?
:MEASure[:VOLTage][:DC]?