RIGOL DP832A - Manual (Page 91)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-67
:PRESet Commands
The :PRESet commands are used to set channel voltage/current values and OVP/OCP values as well as
enable or disable the OVP/OCP functions, over-temperature function and track function (the track function
is only applicable to channels that support the track function: CH2 and CH3 of DP831A/DP831, CH1 and
CH2 of DP832A/DP832) of the user-defined setting. The default voltage/current values of each channel in
the user-defined setting of different models of DP800 series are as shown in the table below.
Table 2-3 Default voltage/current value of each channel in the user-defined setting of different models of
DP800 series
Channel USER1 USER2 USER3 USER4
DP831A
CH1 (8V/5A)
CH2 (30V/2A)
CH3 (-30V/2A)
1.500V/0.5000A
03.300V/1.0000A
-05.000V/1.0000A
3.300V/1.0000A
04.200V/1.0000A
-04.200V/1.0000A
3.300V/1.0000A
05.000V/1.5000A
-08.000V/1.5000A
5.000V/1.0000A
12.000V/2.0000A
-12.000V/2.0000A
DP832A
CH1 (30V/3A)
CH2 (30V/3A)
CH3 (5V/3A)
03.300V/1.000A
03.300V/1.000A
1.500V/1.000A
04.200V/1.000A
04.200V/1.000A
4.200V/1.000A
05.000V/2.000A
08.000V/2.000A
3.300V/1.000A
12.000V/3.000A
24.000V/3.000A
5.000V/2.000A
DP821A
CH1 (60V/1A)
CH2 (8V/10A)
03.300V/1.0000A
3.300V/01.000A
04.200V/1.0000A
4.200V/01.000A
08.000V/1.0000A
5.000V/02.000A
24.000V/1.0000A
8.000V/03.000A
DP811A
CH1 (20V/10A) 03.300V/01.0000A
04.200V/01.0000A 05.000V/02.0000A 12.000V/03.0000A
DP831 [1]
CH1 (8V/5A)
CH2 (30V/2A)
CH3 (-30V/2A)
1.500V/0.500A
03.30V/1.000A
-05.00V/1.000A
3.300V/1.000A
04.20V/1.000A
-04.20V/1.000A
3.300V/1.000A
05.00V/1.500A
-08.00V/1.500A
5.000V/1.000A
12.00V/2.000A
-12.00V/2.000A
DP832 [1]
CH1 (30V/3A)
CH2 (30V/3A)
CH3 (5V/3A)
03.30V/1.000A
03.30V/1.000A
1.50V/1.000A
04.20V/1.000A
04.20V/1.000A
4.20V/1.000A
05.00V/2.000A
08.00V/2.000A
3.30V/1.000A
12.00V/3.000A
24.00V/3.000A
5.00V/2.000A
DP821 [1]
CH1 (60V/1A)
CH2 (8V/10A)
03.30V/1.000A
3.30V/01.00A
04.20V/1.000A
4.20V/01.00A
08.00V/1.000A
5.00V/02.00A
24.00V/1.000A
8.00V/03.00A
DP811 [1]
CH1 (20V/10A) 03.30V/01.00A 04.20V/01.00A 05.00V/02.00A 12.00V/03.00A
Note [1] : When DP831 (DP832, DP821 or DP811) is installed with the high resolution option, its default voltage/current
value of each channel of each user-defined setting are the same with those of DP831A (DP832A, DP821A or DP811A).