RIGOL DP832A - Manual (Page 171)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-147
:TRIGger:IN:RESPonse
Syntax :TRIGger:IN:RESPonse [D0|D1|D2|D3,]{ON|OFF|ALTER}
:TRIGger:IN:RESPonse? [D0|D1|D2|D3]
Description Set the output response of the trigger input of the specified data line.
Query the output response of the trigger input of the specified data line.
Parameter Name Type Range Default
[D0|D1|D2|D3] Discrete D0|D1|D2|D3 D0
{ON|OFF|ALTER} Discrete ON|OFF|ALTER OFF
Explanation  If [D0|D1|D2|D3] is omitted, the command sets the output response of the
data line currently selected.
 ON: when the input signal of the specified data line meets the trigger type set
( :TRIGger:IN:TYPE ), turn on the output of the channel currently selected as
the source under control ( :TRIGger:IN:SOURce ).
 OFF: when the input signal of the specified data line meets the trigger type set
( :TRIGger:IN:TYPE ), turn off the output of the channel currently selected as
the source under control ( :TRIGger:IN:SOURce ).
 ALTER: when the input signal of the specified data line meets the trigger type
set ( :TRIGger:IN:TYPE ), toggle the output state of the channel currently
selected as the source under control ( :TRIGger:IN:SOURce ).
Return Format The query returns ON, OFF or ALTER.
Example :TRIG:IN:RESP D1,ON /*Set the output response of the trigger input of D1 to
output on*/
:TRIG:IN:RESP? D1 /*Query the output response of the trigger input of D1
and the query returns ON*/
Related
Commands
:TRIGger:IN:SOURce
:TRIGger:IN:TYPE