RIGOL DP832A - Manual (Page 101)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-77
:RECAll Commands
Command List:
 :RECAll:LOCal
 :RECAll:EXTErnal
:RECAll:LOCal
Syntax :RECAll:LOCal {1|2|3|4|5|6|7|8|9|10}
Description Recall the instrument state file stored in the specified storage location in the internal
memory of the instrument.
Parameter Name Type Range Default
{1|2|3|4|5|6|7|8|9|10} Discrete 1|2|3|4|5|6|7|8|9|10 None
Explanation  {1|2|3|4|5|6|7|8|9|10} represent the corresponding storage locations in the
internal memory of the instrument respectively.
 You can also send the *RCL or :MEMory[:STATe]:LOAD command to recall the
instrument state file stored in the internal memory of the instrument.
Example :RECA:LOC 1 /*Recall the instrument state file stored in storage location 1 in the
internal memory of the instrument*/
Related
Commands
*RCL
:MEMory[:STATe]:LOAD
:RECAll:EXTErnal
Syntax :RECAll:EXTErnal
Description Recall the instrument state file stored in the root directory of the external memory of
the instrument.
Parameter Name Type Range Default
ASCII string
Refer to the
"Explanation"
None
Explanation  is the specified filename and does not include the filename suffix
".RSF".
 You can also send the :MMEMory:LOAD command to recall the instrument state
file stored in the current operation directory of the external memory of the
instrument.
Example :RECA:EXTE STA /*Recall the instrument state file named STA.RSF in the root
directory of the external memory of the instrument*/
Related
Command
:MMEMory:LOAD