RIGOL DP832A - Manual (Page 51)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-27
*RST
Syntax *RST
Description Restore the power supply to factory state (refer to "Appendix B: Factory
Setting") and clear the error queue.
Related
Commands
:PRESet:KEY
:PRESet[:APPLy]
*SAV
Syntax *SAV {1|2|3|4|5|6|7|8|9|10}
Description Save the current instrument state to the specified storage location in the internal
memory using the default filename.
Parameter Name Type Range Default
{1|2|3|4|5|6|7|8|9|10} Discrete 1|2|3|4|5|6|7|8|9|10 None
Explanation  The power supply provides 10 storage locations (numbered 1 to 10) for
instrument states. The default name is RIGOLn.RSF; n corresponds to the
number of the storage location.
 If a state file has already been stored in the specified storage location, this
command will directly store the current instrument state to the specified
location (directly overwrite the original file). If the state file stored in the
specified storage location is locked (refer to the :MEMory[:STATe]:LOCK
command), this command is invalid (will not overwrite the original file).
 You can also send the :MEMory[:STATe]:STORe or :STORe:LOCal command to
store the current status of the power supply to the specified location in the
internal memory.
Example *SAV 5 /*Save the current instrument state to storage location 5 of state files in
the internal memory of the power supply with the filename
RIGOL5.RSF*/
Related
Commands
:STORe:LOCal
:MEMory[:STATe]:STORe
:MEMory[:STATe]:LOCK