System:communicate:lan:dns, System:communicate:lan:dns -112 – RIGOL DP832A User Manual

Page 136

RIGOL

Chapter 2 Command System

2-112

DP800 Programming Guide

:SYSTem:COMMunicate:LAN:DNS

Syntax

:SYSTem:COMMunicate:LAN:DNS
:SYSTem:COMMunicate:LAN:DNS?

Description

Set the DNS (Domain Name Service) address.
Query the current DNS address.

Parameter

Name

Type

Range

Default

ASCII string

Refer to the "Explanation"

None

Explanation

 This command is only available when the manual IP configuration mode is

enabled (

 The format of is nnn.nnn.nnn.nnn; the first nnn ranges from 1 to 223

(except 127), the other three range from 0 to 255.

 You are recommended to ask your network administrator for an address

available.

 The new setting will only take into effect when

the

command is executed to apply the

network parameter currently set after this command is send.

Return Format

The query returns the DNS address, for example, 172.16.3.2.

Example

:SYST:COMM:LAN:DNS 172.16.3.2 /*Set the DNS address to 172.16.3.2*/
:SYST:COMM:LAN:DNS? /*Query the current DNS address and the query

returns 172.16.3.2*/

Related

Commands

This manual is related to the following products: