Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 88)

88 M-Series User Manual 20 April 2005
Chapter 3 Product Description
Message types displayed in the StatusBar
The following table describes the message types that appear in the StatusBar.
Typically, the StatusBar message area displays application status messages for the
active channel, however, if a problem develops with the software application or a
hardware subsystem, an error message is momentarily displayed and the symbol for
the StatusPane button changes.
Message Type Example Message
Application
Status Message Clip loaded, clip recording, no clip loaded.
Application Error
Message Media disks are full. Cannot record the clip.
Trap Summary
Message The system drive is at full capacity. Disk recorder
operations will fail. Delete unused or temporary assets,
and restart disk recorder.