Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 147)

20 April 2005 M-Series User Manual 147
To start continuous record:
3. To change continuous record length, select Length in the Recorder pane.
The Length dialog box appears.
4. Using the onscreen keypad or external keyboard, enter the clip length by typing
only numbers, colons are added automatically.
5. Choose Ok in the dialog box, or Enter on the external keyboard.
6. Select the record button on the front panel , or use the onscreen transport
controls .
Recording continues until Stop is selected. While recording, the mark in and mark
out update with the current status of the clip. The Time Dome gives a visual
indication record progress.
7. Load and play the clip in Player using one of the following steps:
• In the Recorder pane, select the Preview button, or
• In the Monitor pane , select the Record Channel tab, then drag and drop from the
Record Channel monitor to the Play Channel monitor.
The play channel becomes the active channel, and the clip is cued and ready for
play.