Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 207)

20 April 2005 M-Series User Manual 207
Clearing Event-In/Event-out marks
3. Do one of the following:
• For an existing event, select Accept to propagate the change to the event in the
list.
• For a new event, select Insert to add the event to the list.
Using the event length control
Entering a new event length moves the Event-out point.
1. Select the Length timecode entry control .
2. Enter a new event length.
The event length changes by moving the event-out point.
3. Do one of the following:
• For an existing event, select Accept to propagate the change to the event in the
list.
• For a new event, select Insert to add the event to the list.
Clearing Event-In/Event-out marks
Clearing an event mark resets the mark to the marks used in the source clip. Event-in
is set to the mark-in point of the source clip, and event-out is set to the mark-out point
of the source clip.
To clear an event mark, do one of the following:
• With the event loaded in Event view, select and hold the Event In or Event Out
button, then choose Clear Mark in the pop-up menu.
• With the event loaded in Event view, select the Event-In or Event-Out timecode
control and select Clear , then OK to clear the mark.
Scrub Bar
(Click and drag while
monitoring channel output)