Rack mount hardware shipped with the ivdr – Grass Valley M-Series iVDR User Manual v.2.0.10 User Manual
Page 310
310
M-Series User Manual
20 April 2005
Appendix B Rack-mounting and Connector Pin-outs
Rack mount hardware shipped with the iVDR
Your iVDR comes with rack mounting hardware as shown. The iVDR are shipped
with the chassis sections already attached.
Chassis section is
pre-installed on the
iVDR chassis
Automatic
Rack Section
10-32 PHS
10-32 PHS
Flat
Nut
Flat Nut Bar
Intermediate
Stop Latch
Rear
Stationary
NOTE: Right-
hand and left-hand stationary section is
designated by the RH and the LH ma
rked on the rails.
This manual is related to the following products: