Selecting the jog/still-play mode setting – Grass Valley M-Series iVDR User Manual v.2.0.10 User Manual
Page 115
20 April 2005
M-Series User Manual
115
Adjusting video output
2. Make your video output adjustments or select
Default
to return all video output
settings to their factory default values. See also
for related record channel settings.
These composite analog video output settings are active and can be monitored on
the video output without closing the Configuration dialog box.
3. Change other settings as necessary in the Configuration dialog box, then select
OK
to save and apply all changes at once.
Selecting the Jog/Still-Play mode setting
Jog/Still-Play mode settings determine how to generate the still-play signal for the
play channel when it is setup to freeze on last frame of video in stop mode. You can
select line interpolated, or interlaced. Note that in normal play mode, the play channel
can be setup for E to E mode instead of displaying freeze frame in stop mode. E to E
mode is enabled/disabled in the application running on the channel. Refer to the
“Guide to using Player: Play View” on page 160
“Guide to using Playlist: List
.
1. Select
System
and choose
Configuration
, then select the
Channel
button, select the
P1
or
P2
tab, and open the
Video Output
link. Close other links or use the scroll
button if necessary to locate the link.
2. Locate the still play mode settings.