Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 111)

20 April 2005 M-Series User Manual 111
Selecting the audio input (for models with digital audio)
• You can select Default to return VITC settings to their factory default values.
NOTE: VITC reader adjustments are immediate. You do not need to close to save
settings. The VITC present indicator will light when the VITC reader is configured
properly.
5. Select OK to close.
Selecting the audio input (for models with digital audio)
You must select the audio input for iVDR models equipped with digital audio.
To select the audio input for a record channel:
1. Select System , then choose Configuration.
2. Select the Channel button, then select the R1 or R2 tab.
3. Open the Audio Input link.
Close other links or use the scroll button if necessary to locate the link.
4. Locate the question “What is your audio input type?”.