Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 35)

20 April 2005 M-Series User Manual 35
Select the audio input (digital models only)
4. Make selections as follows:
• Analog Composite — Make this selection to record analog composite video
connected to the record channel’s Composite input. If a warning message is
displayed about composite signal not present, verify that and composite signal
is connected. When you select Analog composite additional video input settings
are available as explained in
“Record channel settings” on page 107 .
• SDI Component — Make this selection to record SDI component video
connected to the record channel’s SDI input. If a warning message is displayed
about SDI not present, verify that and SDI signal is connected.
5. Select OK to save changes, or proceed to “Select the audio input (digital models
only)” .
Select the audio input (digital models only)
You must select the audio input on iVDR models equipped with digital audio inputs.
To select the audio input of each record channel:
1. Select System and choose Configuration , then select the Channel button.
2. Select the R1 or R2 tab, and open the Audio Input link.
Close other links or use the scroll button if necessary to locate the link.
3. Locate the question “What is your audio input type?”.