Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 104)

104 M-Series User Manual 20 April 2005
Chapter 4 Modifying Configuration
3. Select one of the following sources:
• Windows clock — This is the local Windows operating system clock. If you
select this source you should verify that the clock’s time is correct. To do this
follow the procedure
“Accessing the Windows desktop” on page 32 and use
standard Windows procedures.
• VITC input — This is the VITC timecode embedded in the selected record
channel’s video input. Select the drop-down list, then choose one of the record
channels:
- R1
- R2
If a warning message about missing VITC is displayed, make sure your rear
panel connection and source video are correct before proceeding.
• LTC input — Select the drop-down list, then choose one of the record channel
LTC inputs:
- R1
- R2
4. Change other settings as necessary in the Configuration dialog box, then select OK
to save and apply all changes at once.