Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 116)

116 M-Series User Manual 20 April 2005
Chapter 4 Modifying Configuration
Use the scroll button if necessary to locate the settings.
3. Set the still-play mode as follows:
• Field — This is the default setting and uses the content of one field for both
fields during still-play for a one field freeze. This mode eliminates the motion
jitter that can be present in Interlaced mode.
• Frame — This mode displays two fields in still play mode for a two field freeze.
With this mode you might see some motion jitter in still-play.
4. Change other settings as necessary in the Configuration dialog box, then select OK
to save and apply all changes at once.
Generating VITC
You can specify the lines on which VITC timecode is generated as follows:
1. Select System and choose Configuration , select Channel , select the P1 or P2 tab, and
open the Video Output link. Close other links or use the scroll button if necessary
to locate the link.
2. Locate the question “What lines should be used when generating VITC timecode”.