Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 202)

202 M-Series User Manual 20 April 2005
Chapter 8 Working With Playlists
Playing a list
Once the list is completed, you can play it using the onscreen or front panel transport
controls. The following sections describe playout using these controls.
Starting playout
To begin playout:
• Open the list, then press Play .
- or -
• Select an event in the list, then press Play .
Other playout operations
While playback is in progress, you can perform the following operations using the
front panel transport controls, touch screen, and Playlist user interface. If you don’t
have a front panel, use the keyboard shortcuts for all transport controls.
See “Using
Keyboard shortcuts” on page 79 .
Playlist keyboard shortcuts
You can also control Playlist playout using an external keyboard. Refer to “Using
Keyboard shortcuts” on page 79 .
Playing a list using GPI input triggers
You can control how a list plays using GPI input triggers assigned to the play channel.
Refer to
“Configuring GPI inputs” on page 121 for information on configuring GPI
inputs.
To... ...do this
...continue playout after a pause in the list select the Play button.
...play the next event press the Play and FF buttons.
-or-
select Goto, and then choose Next Event in the
Goto pop-up menu.
...play the next section press the Play button and hold the FF button down.
-or-
select Goto, and then choose Next Section in the
Goto pop-up menu.
...skip playback to any event or section in the list first, press and hold the Play button, then select the
event or section using the touch screen.
...select an event or section to playback first, select the event or section, then click Goto, and
choose Selection in the Goto pop-up menu. Then
press Play.