Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 144)

144 M-Series User Manual 20 April 2005
Chapter 6 Recording Clips
4. Using the onscreen keypad or external keyboard, enter the clip length by typing
only numbers, colons are added automatically.
5. Choose Ok in the dialog box, or Enter on the external keyboard.
6. Select the record button on the front panel , or use the onscreen transport
controls .
Recording continues until Stop is selected or the desired length is reached. While
recording, the mark in and mark out update with the current status of the clip. The
Time Dome gives a visual indication of the percent complete as well as a
countdown from the specified length down to
00:00:00:00 .
To specify clip length after recording has begun:
1. Select Length in the Recorder pane.
The timecode dialog box appears.
2. Enter the desired length using the onscreen keypad or external keyboard, then
select OK or Enter .
If the entered length is valid, longer than the amount of material already recorded,
the clip continues to record until it reaches the specified length or until you select
Stop .