Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 102)

102 M-Series User Manual 20 April 2005
Chapter 4 Modifying Configuration
Selecting the video standard
The video standard setting applies to all record and play channels.
1. On the Toolbar, select System and choose Configuration .
The Configuration Manager dialog opens.
2. On the Configuration Manager dialog select System .
The System configuration settings appear.
3. Select the video standard for your system, either NTSC (525 Line) or PAL (625 Line) .
This setting applies to all channels.
4. Change other settings as necessary in the Configuration dialog box, then select OK
to save and apply all changes at once.
5. When prompted, restart the iVDR. The restart is required to put the video standard
change into effect.
Setting the audio reference level
The audio reference level setting applies to all record and play channels.
1. On the Toolbar, select System and choose Configuration .
The Configuration Manager dialog opens.
2. On the Configuration Manager dialog select System .
The System configuration settings appear.