Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 171)

20 April 2005 M-Series User Manual 171
Viewing the cue list
Viewing the cue list
1. Select a play channel using the front panel button , or the play channel tab in the
Tools pane .
2. In the toolbar, select Cue .
The Cue view appears showing the cue list for the clip loaded in Player. Initially,
only the mark-in and mark-out cue points are listed.
Adding a cue point
While the clip is playing, or in the stop mode, use the transport controls to find the
desired frame in the clip, then do one of the following:
• Select Add Cue .
• Select the menu button , then choose Add Cue .
A cue point is added to the cue list using a unique name, e.g. cue_1.
NOTE: Using the iVDR preview feature, you can play and add cue points to a clip
while it is still being recorded. (See
“Previewing a clip” on page 154 .)
Related topics
• “Jump to the next cue point.” on page 172
• “Removing a cue point” on page 171
Removing a cue point
1. In Cue view, select a cue point in the list.
2. Do one of the following:
• Select the Remove button, or
• Select the menu button , then choose Remove Cue .
Jump to the selected cue point.
Use the following steps to jump to the selected cue point.
1. In Cue view, select a cue point.
2. In Cue view, do one of the following:
• Select the Cue Selection button, or
• Select the menu button , then choose Cue Selection , or
• Select the Goto button, then select Selected Cue .
3. Press the Play button on the front panel or use the onscreen transport controls
Play out starts from the cued frame.
P1