Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 126)

126 M-Series User Manual 20 April 2005
Chapter 4 Modifying Configuration
Front Panel settings
You can modify the operation of the Front Panel controls. The controls you can
modify are:
• “Adjusting the jog/shuttle knob ranges” on page 126
• “Enabling rear panel audio monitor volume control” on page 127
• “Setting start record button sequence” on page 127
• “Selecting full screen monitor mode” on page 128
Adjusting the jog/shuttle knob ranges
1. Select System , choose Configuration , and select the Panel button.
The Front Panel settings are displayed.
2. Make jog, shuttle, and VAR (variable speed play) settings to control the sensitivity
of the Jog/Shuttle knob and the initial play speed used when variable speed play is
selected.
The Always start at the preset var setting option determines the initial play speed
when the variable speed play is started. When this option is selected, initial play
speed is determined by the
VAR setting , then you can adjust the play speed using
the Jog/Shuttle knob (RANGE: ±1x normal playback speed). When this option is
cleared, the initial play speed is determined by the play speed last set by the Jog/
Shuttle knob.
You can select Default to return the settings to their factory default values. Refer to
“Using Front Panel controls” on page 84 for more information on these settings
and how they affect front panel operation.
3. Change other settings as necessary in the Configuration dialog box, then select OK
to save and apply all changes at once.