Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 29)

20 April 2005 M-Series User Manual 29
Power connection
Power connection
Connect the power cable as shown.
VGA Display ‘hot-key’ sequence
On systems without the optional Front Panel installed, the Windows desktop is
oversized at power-up and scrolls as you move the mouse. This is because the display
adapter card in the iVDR always starts in 640x480 mode even though the Windows
screen size is set to 800x600.
To easily change the display adapter settings, press the CTRL+ALT+C hot-key
sequence when AppCenter is fully initialized after power-up to switch the display
adapter card to 800x600 display settings. If you inadvertently select this key sequence
on an iVDR with a front panel, press the
CTRL+ALT+L hot-key sequence to return to
640x480 display settings which is required for front panel operation.
P1 LT
R1 LTC
Pu sh
R1 IN P1 OUT P1 OUT
Composite R1 & P1
R2 IN P2 OUT
Composite R
R1 IN P1 OUT P1 OUT
SDI R1 & P1
VAR
JOG SHTL
R1
P2
P1
R2
Ctrl
+ +
Alt C
IMPORTANT: On systems without the
optional front panel, press the Ctrl+Alt+C
hot-key sequence when AppCenter is
fully initialized after power-up to set the
correct display settings.