Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 164)

164 M-Series User Manual 20 April 2005
Chapter 7 Playing and Editing
$ Countdown Timecode Displays the time remaining in the clip. To select the countdown
mode you want to monitor, open the Options dialog box by selecting
Options in the context menu.
% Context Menu Add Cue – Creates a cue point at the timecode for the current
frame. The channel can be in stop or play mode. The cue point is
added using a default name such as “cue_1”.
See “Using Cue points
for playback” on page 170 .
Remove Cue – removes the selected cue.
Rename Cue – used to rename the selected cue.
Create Clip – Creates a subclip from the currently loaded clip. The
selected cue point becomes the mark-in point, while the mark-out
point is the same as the source clip. If more than one cue point is
selected, a subclip is created using the first and last cue points.
See
“Creating Subclips” on page 179 .
Create All Clips – Similar to Create Clip, but creates a subclip for
each cue point in the list. Each cue point becomes a mark-in point,
while the mark-out point is the same as the source clip.
See
“Creating Subclips” on page 179 .
Help – opens the online help program.
E to E – When E to E mode is enabled, the channel output displays
the corresponding record channel input when the play channel is
stopped or the clip is ejected. If E to E is disabled, the output freezes
on the last frame of video.
See “Selecting E to E mode” on page 182 .
Control Description and User Operation