Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 114)

114 M-Series User Manual 20 April 2005
Chapter 4 Modifying Configuration
Play channel settings
Use the following procedures to configure each of your play channels, P1 and P2.
• “Adjusting video output” on page 114
• “Adjusting video output timing” on page 118
• “Configuring SDI output embedded audio” on page 120
Adjusting video output
The settings for video output are displayed on a continuous, scrolling page within the
Configuration Manager dialog box. To work through all the settings simply start at
the top and scroll down, answering the questions as you go. The following procedures
explain each setting.
• “Adjusting analog composite output levels” on page 114
• “Selecting the Jog/Still-Play mode setting” on page 115
• “Generating VITC” on page 116
• “Displaying colorbars” on page 117
Adjusting analog composite output levels
1. Select System and choose Configuration , then select the Channel button, select the
P1 or P2 tab, and open the Video Output link. Close other links or use the scroll
button if necessary to locate the link.
Use the scroll button to view all the settings.