Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 175)

20 April 2005 M-Series User Manual 175
Editing a clip: Clearing mark-in/mark-out
2. Enter a timecode value using the onscreen keypad, or an external keyboard, then
select OK or Enter .
Alternatively: Use the current position scrub bar in the timecode entry
dialog box to locate the desired frame, then select OK .
Using the clip length control
Entering a new clip length moves the mark-out point.
1. Select the Length timecode entry control .
2. Enter a new clip length.
The clip length changes by moving the mark-out point.
Editing a clip: Clearing mark-in/mark-out
Clearing a mark point resets the mark to it’s default position— mark-in is set to the
beginning of available media; mark-out is set to the last frame of available media.
To clear a mark point, do one of the following:
• In Play view, select and hold the In or Out button, then choose Clear Mark in the
pop-up menu.
• In Play view, select the mark-in or the mark-out timecode control and select Clear ,
then OK to clear the mark.
Scrub Bar
(Click and drag while
monitoring channel output)
Clear
(Select Clear, then
OK to clear the mark.)