Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 177)

20 April 2005 M-Series User Manual 177
Selecting the audio monitor source
NOTE: Saved audio levels are used every time the clip is loaded and played.
Unsaved changes are lost when the clip is ejected.
4. Select the Meterbar button again to return to Player view.
Selecting the audio monitor source
In iVDRs equipped with digital audio (4ch/video), you can select the stereo pair to
monitor on the rear panel monitor outputs and the front panel headphone jack.
To select the audio monitor source:
1. In Play view , select the menu button , then choose Options .
The options dialog box opens.
2. Select the audio pair to monitor, then select OK to save changes.
Striping timecode (replacing the timecode track)
The stripe timecode dialog allows you to overwrite the existing timecode track for the
loaded clip. You can replace the recorded timecode with time of day, or a specific start
timecode value.
1. Load the clip in the Player.
2. In Play view , select the menu button , then choose Stripe Timecode.