Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 119)

20 April 2005 M-Series User Manual 119
Adjusting video output timing
2. Adjust video output timing using the controls as described:
• Frames — delays video output. Range: NTSC 0-1 frames, PAL 0-3 frames.
• Lines (coarse)— delays the video output. Range: NTSC (525 lines) 0-524 lines,
PAL (625 lines) 0-624 lines.
• Samples (fine)— delays the video output. Range: NTSC (525 lines) 0-1715
clock samples, PAL (625 lines) 0-1727 clock samples.
• Analog sub-pixels (SC)— This setting applies to analog video only. Delays the
timing within one sample interval.
Output delay adjustments affect the SDI and composite analog outputs together.
The analog sub-pixel adjustment is only a “fine” trim on the composite output with
respect to the current SDI timing.
Video output timing adjustments take effect immediately without closing the
Configuration dialog box.
3. Select OK to close and save changes.