Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 127)

20 April 2005 M-Series User Manual 127
Enabling rear panel audio monitor volume control
Enabling rear panel audio monitor volume control
If the optional front panel is installed on your iVDR, selecting this check box allows
you to use the headphone volume knob to control the rear panel audio monitor level.
If the optional front panel is not installed or this selection is cleared, the rear panel
audio monitor gain is unity.
1. Select System , choose Configuration , and select the Panel button.
The Front Panel settings are displayed.
2. Scroll down and locate the “Rear panel audio monitor output setting”, then select
the Controlled by front panel volume knob check box.
3. Change other settings as necessary in the Configuration dialog box, then select OK
to save and apply all changes at once.
Setting start record button sequence
You can configure which front panel buttons you have to press to start recording a
clip.
To set the record button sequence:
1. Select System , choose Configuration , then select the Panel button.
The Front Panel settings are displayed.
2. Scroll down and locate the record button settings.