Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 120)

120 M-Series User Manual 20 April 2005
Chapter 4 Modifying Configuration
Configuring SDI output embedded audio
In iVDR models equipped with digital audio, you can specify the embedded audio
group for the SDI output. You can also disable embedded audio to remove the signal
from the SDI output.
To select the embedded audio group:
1. Select System and choose Configuration , then select the Channel button.
2. Select the P1 or P2 tab, then open the Audio Output link.
3. Choose the Audio Group (1 - 4) using the Audio group drop-down list.
Selecting Disable removes the embedded audio signal from the SDI output.
4. Select OK to close and save changes.