Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 280)

280 M-Series User Manual 20 April 2005
Chapter 10 Using Remote Control Protocols
About Front Panel remote indicator lights
The remote control indicator lights on the Front Panel next to the channel select
buttons glow whenever a protocol application has been launched and is running on
that channel.
Making RS-422 and Ethernet connections
Protocol control is available through four 9-pin RS-422 serial port connectors
mounted on the iVDR rear panel, or through an Ethernet network connection (AMP
only).
Refer to the following sections to make cable connections:
• “Connecting RS422” on page 53
• “Connecting the Ethernet network cabling” on page 37
VAR
JOG
SHTL
R1
P2
P1
R2
Channel
Select Buttons
Remote Indicator