Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 45)

20 April 2005 M-Series User Manual 45
1GBaseT Configuration: Data and streaming between iVDRs
To add a network host names:
1. Start AppCenter, if it is not already running, using the desktop shortcut.
2. In AppCenter toolbar, select System , then choose Configuration .
3. Select the Hosts button.
The network host names are displayed.
4. Select Add , to open the Add Host dialog box, then do the following:
a. Select the “Enter host name:” text entry control, then enter the computer name
of a peer iVDR.
Make sure to enter the exact computer name. Any differences will result in being
unable to connect to the iVDR.
b. If you are using remote protocols to perform video network transfers, you must
use the following steps to add a unique Controller ID for each host, otherwise,