Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 235)

20 April 2005 M-Series User Manual 235
Moving an asset to another bin
Moving an asset to another bin
There are two ways to move an asset to another bin: Using Cut/Paste or the Send To
dialog box.
Using the cut and paste commands
1. Select the asset(s) in the asset list using the front panel touch screen, the front panel
selection knob , or a mouse.
2. Cut the asset to the clipboard using one of the following:
• Select Cut in the asset context menu , or
• Select Edit in the AppCenter toolbar, then choose Cut .
• Use keyboard shortcut Ctrl + X .
3. Change the current bin to the target bin. (Refer to “Changing current bin using
‘Look in’ drop-down list.” on page 230 .)
4. Paste the asset(s) from the clipboard to the current bin.
The Paste operation is accessed in the same way as Cut.
NOTE: If an asset is locked or in use, it remains in the existing bin, while the
remaining assets are moved to a new bin with the specified name.
Using Send To
1. Select the asset(s) in the Asset List using the front panel touch screen, the front
panel selection knob , or a mouse.
2. To open the Send To dialog box using do one of following:
• Select the Clips pane context menu button , then choose Send To , or
• Select Send To in the asset context menu , or
• Select the Send To button in the Clips pane.
If the Send To button is not displayed in the Clips pane, refer to assignable
buttons in “Guide to using the Clips pane” on page 220 .
The Send dialog box appears.
3. In the Send dialog box, select Move to in the right-hand drop-list.