Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 139)

20 April 2005 M-Series User Manual 139
Starting Recorder
Starting Recorder
When the iVDR boots, an application is launched for each channel. From the factory,
each record channel is configured to run Recorder, but if someone has changed this
configuration, you can use the following steps to reselect Recorder. Selecting the
Recorder application causes the current record channel application to exit when
Recorder is started.
To start Recorder on a record channel:
1. In the AppCenter toolbar, select Split Screen .
2. In the AppCenter toolbar, select Monitor .
3. In the Monitor pane, select the control application drop-down list for the
record channel, then choose Recorder .
Recorder appears in the Applications pane and becomes active.