Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 101)

20 April 2005 M-Series User Manual 101
Restoring default settings
3. Use the up arrow or select folders to navigate to the custom configuration file.
4. Select the custom configuration file.
5. Select Open .
The custom settings are loaded into Configuration Manager, but they are have not
been saved and put into effect.
6. Click OK to save and apply settings, and to close Configuration Manager.
Restoring default settings
You can restore factory default settings as follows:
• You can restore some individual settings or groups of settings by selecting the
Default button which appears below the settings in the configuration screen.
• You can restore all the settings in Configuration Manager at once to their default
values as explained in the following procedure. This is useful for test purposes or
for removing site-specific settings when re-installing at a new site.
To restore all settings at once to their default values:
1. If you want to save current settings you should work through the previous
procedure “Saving and restoring custom iVDR configuration” before proceeding.
2. On the Configuration Manager dialog, select the context menu button , then
choose Restore Defaults .
The default settings are loaded into Configuration Manager, but they have not yet
been saved and put into effect.
3. Click OK to save settings and close Configuration Manager.