Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 154)

154 M-Series User Manual 20 April 2005
Chapter 6 Recording Clips
Changing the current bin
When recording starts, the new clip is saved in the current bin. The current bin is
displayed under the clip name. You can use the Clips pane to change the current bin.
To change the current bin for a record channel:
1. Make sure the record channel is selected and displayed in the Applications pane.
2. Select Clips in the AppCenter toolbar to open the Clips pane.
3. In the Clips pane, touch or click the Current Bin label , then
choose a bin from the list.
Related topics:
• “Creating a new bin” on page 231
Previewing a clip
You can preview a clip while it is still being recorded. Preview loads the currently
recording clip into a play channel. The play channel becomes the active channel, and
the clip is cued and ready for play.
NOTE: If the corresponding play channel is not available, i.e. the play channel is
already playing a clip, a warning message is displayed in the Statusbar.
1. Start the record process.
2. Preview the clip using one of the following methods:
• In the Recorder pane, select the Preview button.
- or -
• In the Monitor pane , select the record channel tab, then drag and drop it in a play
channel monitor.
The play channel becomes the active channel, and the clip is cued and ready for
play.
3. To play the clip, select the front panel play button , or use the onscreen transport
controls .