Grass Valley M-Series iVDR User Manual v.2.0.10 - Manual (Page 118)

118 M-Series User Manual 20 April 2005
Chapter 4 Modifying Configuration
Use the scroll button if necessary to locate the setting.
4. Select Colorbars output .
The selection is displayed immediately. You can monitor the channel output to see
the 75% colorbar signal. This setting is for test purposes only, so it is not saved.
When you select
OK to close Configuration Manager, or clear the colorbar check
box, the video output returns to normal.
Adjusting video output timing
Some playout timing adjustment may be required to satisfy downstream timing
requirements in your system. If so, adjust playout timing as follows:
1. Select System and choose Configuration , select Channel , select the R1 or R2 tab, and
open the Video Output Timing link. Close other links or use the scroll button if
necessary to locate the link.