Selecting the channel control application, Selecting the active channel, See “selecting the channel control – Grass Valley M-Series iVDR User Manual v.2.0.10 User Manual
Page 136
136
M-Series User Manual
20 April 2005
Chapter 5 Using the Monitor Pane
Selecting the channel control application
When the M-Series iVDR is started, an application is launched for each channel. Use
the following steps to change the application running on a channel.
1. In the AppCenter toolbar, select
Split Screen
, and then
Monitor
.
2. In the Monitor pane, select the control application drop-down list
for a
channel, then choose an application.
The current applications closes, and the selected applications opens. The
application appears in the applications pane.
Selecting the active channel
• Click or touch any place within the desired channel monitor, including the channel
tab to select that channel and make it the active channel.
Control
Application
Drop List